:	May 13, 2004

.

Disconnect the battery ground cable.

.

Remove the exhaust system.

.

Remove the fender splash shield.

.

:   The heatshield consists of 3 parts. Remove the upper suspension arm and brake line heat shields for access.   Remove the 3 nuts.   Remove the 3 bolts.

.

Remove the exhaust manifold.   Remove the 8 bolts.   Collect the spacers and discard the bolts.   Remove the gasket/heat shield retaining bolt.   Discard the gasket/heat shield.

.

Clean the component mating faces.

.

Install the exhaust manifold.   Install the gasket/heat shield.   Tighten the heat shield bolt to 25 Nm (18 lb.ft).   Evenly and progressively, tighten the bolts in the sequence shown to 20 Nm (15 lb.ft).

.

:   The heatshield consists of 3 parts. Install the upper suspension arm and brake line heat shields.   Install the bolts.   Install the nuts.

.

Install the fender splash shield.

.

Install the exhaust system.

.

Connect the battery ground cable.